Cino FA470 - Manual (Page 123)

Command Descriptions
2-108
Parameter(s)
< Table 6-1-2 > Get TS Operation Parameter(s) Field
Parameter PID Size
Presentation Control 00h 01h 00h 00h
Presentation Auto-sense 00h 02h 00h 00h
Presentation Sensitivity 00h 03h 00h 00h
Reread Delay 00h 04h 00h 00h
Flash Duty Cycle 00h 05h 00h 00h
Good Read Delay 00h 06h 00h 00h
Light Source On Time 00h 07h 00h 00h
Hands Free Time-out 00h 08h 00h 00h
Time Delay To Low Power Mode 00h 09h 00h 00h
Trigger Control 00h 0Ah 00h 00h
Scan Rate Control 00h 0Bh 00h 00h
Buzzer Tone Adjust 01h 00h 00h 00h
Power on beep 01h 01h 00h 00h
Power on Indication 01h 02h 00h 00h
Vibrator 01h 03h 00h 00h
Good Read Duration 01h 04h 00h 00h
Good Read Indicator 01h 05h 00h 00h
1D Barcode Inverse Reading 02h 00h 00h 00h
Dollar Sign Control 02h 01h 00h 00h
Redundancy 02h 02h 00h 00h
Data Transmission Packet 02h 04h 00h 00h
UPC/EAN Security Level 02h 06h 00h 00h
Supplement Scan Voting 02h 08h 00h 00h
Laser Aiming Control 02h 09h 00h 00h
LED Illumination 02h 0Bh 00h 00h
Illumination Delay Duration 02h 0Ch 00h 00h
Operation Mode (Tethered Scanner) 10h 00h 00h 00h
Operation Mode (Tethered A Series) 70h 00h 00h 00h
Hand-Held Mode Illumination & Aiming Control 70h 01h 00h 00h
Hand-Free Mode Decode Aiming Control 70h 02h 00h 00h
Aiming Control 70h 03h 00h 00h
Delay Aiming Timeout 70h 04h 00h 00h
Presentation Background Lighting 70h 05h 00h 00h
Center Alignment 70h 06h 00h 00h
Mobile Phone Capture 70h 07h 00h 00h
Unique Barcode Reporting 70h 08h 00h 00h