Cino FA470 - Manual (Page 42)

Command Descriptions
2-27
FS Test Mode
(FS)
Descriptions
Set the Fixed Mount and Scan Module to Test Mode.
You may refer to “FuzzyScan Fixed Mount Scanner Programming Manual “or “FuzzyScan Fixed
Mount Scanner Quick Start Guide” for more details about the Test Mode.
Available for FM480, FA470, SM380 & SM5700 series
Packet Format
Prefix Opcode Status Length Parameter(s) LRC Suffix
7Eh 80h 06h 00h 00h 00h 01h See Below Variable 7Eh
1 Byte 3 Bytes 1 Byte 2 Bytes 1 Byte 1 Byte 1 Byte
. Host Requirements
If the device successfully received the above command issued by the host, a “Device ACK” will be sent
to the host right after the device performed the action. Otherwise, a “Device NAK” will be sent to host to
issue a command error. However, if the host can not receive any response from the device within the
user preset time-out duration, please resend the above command.
. Length
Total size (bytes) of the Parameter(s) field
. LRC
”Opcode” XOR “Status” XOR “Length” XOR “Parameter(s)”
Parameter(s)
< Table 4-2 > FS Test Mode Parameter(s) Field
Parameter / PID / Size Options Descriptions
FS Test Mode
PID : <Null>
Size : 00h 01h (1 Byte)
- 00h
- 01h
Fixed Reader Enter Test Mode 0
Fixed Reader Enter Test Mode 1