Cino FA470 - Manual (Page 168)

Command Descriptions
2-153
Parameter(s)
< Table 6-5-1 > Set WF Operation Parameter(s) Field (Continued)
Parameter / PID / Size Options Descriptions
Beeping Control
PID : 01h 06h
Size : 00h 01h (1 Byte)
Bit 0
- 0
- 1
Bit 1
- 0
- 1
Radio Connection Beep
Enable *
Disable
Battery Power Low Beep
Enable *
Disable
Scan Rate Control
PID : 00h 0Bh
Size : 00h 01h (1 Byte)
- 00h
- 01h
Dynamic *
Fixed
Laser Aiming Control
PID : 02h 09h
Size : 00h 01h (1 Byte)
- 00h
- 01h
Disable
Enable *
LED Illumination
PID : 02h 0Bh
Size : 00h 01h (1 Byte)
- 00h
- 01h
Always on
Intelligent Scanning *
Illumination Delay Duration
PID : 02h 0Ch
Size : 00h 01h (1 Byte)
- 00h
- 01h
- 02h
- 03h
- 04h
100ms
200ms
300ms
400ms
500ms
. Note
1. Laser Aiming Control is only available for L788WD
2. LED Illumination, Illumination Delay Duration are only available for L780WD, L788WD