Labconco Protector XL Floor-Mounted (Walk-In) Laboratory Hoods 98606 - Manual (Page 21)

17
Product Service 1-800-522-7658
Chapter 3: Getting Started
Figure 3-2
Front Upper Sash attaches to Inner
Cable to Inner Sheet Metal Weight
for partial upper travel only
Rear Lower Sash attaches to Outer
Cable to Outer two Weights for full
travel
Inner Rear Pulley
Outer Rear Sheave
Outer Front
Pulley for
Rear Lower
Sash
Rear Weight Track &
#10-24 Flathead
Screw & #10-24
KEPS Nut
1/4"-20
Hardware for
fastening Lower
Base to Upper
Cabinet.
Corner Post is
Removed to
Show Sashes
Rear Lower Sash
Front Upper Sash
Left Corner Post
is removed to
show Dual Sash
Track
Location of self-
drilling screws
to mount corner
posts
Inner Front
Pulley for Front
Upper Sash