Labconco Protector XL Floor-Mounted (Walk-In) Laboratory Hoods 98606 - Manual (Page 54)

50
Product Service 1-800-522-7658
Chapter 7: Modifying Your Protector Fume Hood
Contact Labconco Customer Service for ordering
information. These are customized orders for Protector
XL Floor-Mounted Hoods.
Figure 7-7
Installing an Electrical
Duplex Outlet
Your Protector XL Floor-Mounted Fume Hood can be
ordered with duplex outlets, however, if you ordered a
model without an electrical duplex outlet you can have
one installed in the field by a qualified electrician.
Contact Labconco Customer Service for ordering
information. (Not acceptable on explosion-proof
hoods).
Figure 7-8
Your Next Step
After you understand the modifying procedures, you are
ready to proceed to Chapter 8: Troubleshooting.