Labconco Protector XL Floor-Mounted (Walk-In) Laboratory Hoods 98606 - Manual (Page 6)

2
Product Service 1-800-522-7658
Chapter 1: Introduction
About This Manual
This manual is designed to help you learn how to
install, use, and maintain your laboratory fume hood.
Instructions for installing optional equipment on your
hood are also included.
Chapter 1: Introduction provides a brief overview of
the Floor-Mounted (Walk-In) Laboratory Fume Hood,
explains the organization of the manual, and defines the
typographical conventions used in the manual.
Chapter 2: Prerequisites explains what you need to do
to prepare your site before you install your laboratory
fume hood. Electrical and service requirements are
discussed.
Chapter 3: Getting Started contains the information
you need to properly unpack, inspect, install, and
certify your laboratory fume hood.
Chapter 4: Performance Features and Safety
Precautions explains how the Protector XL Floor-
Mounted Hood operates and the appropriate precautions
you should take when using the fume hood.
Chapter 5: Using Your ProtectorXL Floor-Mounted
Hood discusses the basic operation of your fume hood.
Information on how to prepare, use and shut down your
Protector XL Floor-Mounted Hood are included.
Chapter 6: Maintaining Your Protector XL floor-
Mounted Hood explains how to perform routine
maintenance on your fume hood.
Chapter 7: Modifying Your Protector XL Floor-
Mounted Hood explains how to modify the fume hood
or add accessories.
Chapter 8: Troubleshooting contains a table of
problems you may encounter while using your
laboratory fume hood including the probable causes of
the problems and suggested corrective actions.