Labconco Protector XL Floor-Mounted (Walk-In) Laboratory Hoods 98606 User Manual
Page 37
33
Product Service 1-800-522-7658
Chapter 4: Performance Features and Safety Precautions
9. Streamlined corner posts provide maximum
visibility and the flexibility to add services after
installation.
10. All hoods are factory-prepared for up to 8
service fixtures.
11. Duplex electrical receptacles are mounted on
the right and left corner posts as requested.
Receptacles are factory-wired to hood single
point junction box.
12. Accessory Guardian™ Digital Airflow
Monitor or Guardian Jr. Monitor
continuously monitors face velocity. An
audio/visual alarm alerts the user to low airflow
conditions. The right corner post is factory-
prepared to accommodate the Guardian Monitor
(sold separately).
13. Frame of epoxy-coated steel and aluminum is
durable and corrosion-resistant.
14. Exhaust connection. The hood features 12"
(12.75" OD pipe) exhaust connections sized to
allow for a minimum static pressure loss
through the hood structure while providing a
good transport velocity through the exhaust
system.
15. Optional Ceiling Enclosure Kits (not shown)
are available for a decorative facade between
the hood and the ceiling.