Labconco Protector XL Floor-Mounted (Walk-In) Laboratory Hoods 98606 - Manual (Page 52)

48
Product Service 1-800-522-7658
Chapter 7: Modifying Your Protector Fume Hood
Installing Ceiling
Enclosures above the Fume
Hood
Your Protector XL Floor-Mounted Fume Hood has
mounting holes to accept a ceiling enclosure to close
off the area between the top of the hood and the ceiling.
Contact Labconco Customer Service for ordering
information.
Figure 7-1
Installing Additional Service
Fixtures
Additional service fixtures can be installed in the
available service fixture holes in both sidewalls and
corner posts. The fume hood is factory set to accept up
to four valves per side. Contact Labconco Customer
Service for information.
Figure 7-2 Knob Figure 7-3 Valve Figure 7-4 Hose Connector