Xblue Networks X-50 - Manual (Page 125)

XBLUE Networks 125
Advanced Programming
Securit
y
7
The outgoing IP Filter is a set of parameters used to create a rule, which will block specific IP Addresses. All of the
parameters must be true or the packet will continue unchanged.
•
Filter Name - Each outgoing filter should have a unique name.
•
Source Protocol - TCP, UDP, TCP/UDP or ICMP
•
Source IP Address - the originating IP Address of packet to be evaluated
•
Source Subnet Mask - the originating Subnet Mask of the packet to be evaluated.
•
Source Port - the originating port of the packet to be evaluated
•
Destination IP Address - the destination IP Address of the packet to be evaluated.
•
Destination Subnet Mask - the destination Subnet Mask of the Packet to be evaluated
•
Destination Port - the destination port of the packet to be evaluated
Each of these parameters are check, if one of the parameters does not match, the packet is released, otherwise the
next parameter will be checked. The action will only take place if all of the parameters are found to be true.