Xblue Networks X-50 - Manual (Page 168)

Voice
168 XBLUE Networks
9
SI
P Au
th
en
tication
•
Phone Number - Enter the phone number, generally 3 or 4 digits in length, that will be used by a SIP
extension to authenticate on the X-50 VoIP Telephone System. This number will also become the
extension number for the entered extension. The extension number must be between the extension
start and the extension end numbers as defined in the numbering plan page 187 .
•
Password - Enter a password (up to 24 characters) that will be used to authenticate each SIP extension.
•
Day Class of Service - Each extension is assigned a day class of service from 0 through 7 as defined in
Call Restriction Table Configuration page found under the Trunk section of the Voice programming
parameter.
•
Night Class of Service - Each extension is assigned a night class of service from 0 through 7 as defined
in Call Restriction Table Configuration page found under the Trunk section of the Voice programming
parameter.
•
FXS Phone -
•
FXS phone is the extension number of the Single Line Telephone Port in the X-50 VoIP
Telephone System. Although the extension number cannot be changed here, the extension’s
name and the day and night classes of service are defined here.
•
FXS Display Name - Enter the name to be displayed when this extension calls another
extension within the system or voice network.
•
FXS Class of Service - Select the Day and Night Class of Service for this extension
•
Registration Configuration - Allows the administrator the ability to change some specific SIP registration
parameters.
•
- Minimal Expire - This is the minimal amount of time that an extension will remain registered
before trying to reregister.
•
- SIP Port - This allows the administrator the ability to redefine the port that SIP extensions will
use to communicate.