Xblue Networks X-50 - Manual (Page 182)

Voice
182 XBLUE Networks
9
Cal
l R
outing R
ules
For proper operation of Call Log - Dialed, Missed, and Received Calls, the home
area code, and automatic long distance insert, must be programmed into the Call
Routing Table.
Enter the home area code, where the system is located, such as 913 in the “From”
and “To”, then the maximum and minimum digits dialed will be 10, in both, then
enter 3 digits to be deleted by the system before the number is dialed. Do not
enter any digits into the “Delete” parameter if all 10 digits should be dialed. There-
fore, when a number in the entered area code is dialed, the area code if there is
an entry in the delete parameter, in the example, 913, will be delete. Tthe remain-
ing 7 digits will be dialed.
The second entry will automatically enter a 1 for all other 10 digit numbers. Enter
“From 2”, “To 9”, Min=10, Max=10, Insert=1, and “Group” default is 1. When any
number that begins with 2 through 9, except 913, will receive a 1, when it is sent
to the telephone line.
Kansas
In Scottsdale Arizona, for example, any 10 digit number that is dialed with 480 as
the first three digits, 480 will be deleted. Any 10 digit number that has 602 and
623 as an area code, all 10 digits will be dialed. All other 10 digit numbers regard-
less of area code will receive a 1 before sending the call to the telephone line.
Scottsdale, AZ