Xblue Networks X-50 - Manual (Page 72)

Telephone Feature Description Table
72 XBLUE Networks
4
Servic
e Mode
Service Mode
Description:
The Operator has the ability to change the mode of the system from day mode to night mode or timed mode. When
the system is set to day mode, the Auto Attendant will only play the day greeting and extensions will use the day
Class of Service for dialing privileges. When the system is in night mode, the Auto Attendant will only play the night
greeting and extensions will use the night Class of Service for dialing privileges. When the system is in timed mode
the system will automatically switch between day, lunch and night modes using the service mode settings in the X-
50 system.
Operation:
Only the attendant has the ability to swap between the service modes:
•
Dial: *790 - displays the current mode
•
Dial: *791 - changes the system into Day mode
•
Dial: *792 - changes the system into Night mode
•
Dial: *793 - changes the system into time mode to automatically change between modes.
Notes:
1. This feature only works with the attendant extension
Telephone Line Flash
Description:
The flash command is used to activate a telephone line feature, such as call waiting or three way calling.
Operation:
While on a telephone line call, X2020 telephone users may press the software button under the word “Flash”.
Notes:
1. When using an analog (Single Line) telephone without a “Flash” key may cause erratic operation.
2. Use *790 when programming a button to toggle between day and night modes.