Xblue Networks X-50 - Manual (Page 75)

XBLUE Networks 75
5 Installation
Installation Planning
This chapter will show how to prepare and install the X-50 system and basic networking setup and
protocol.
Basics
1. Never perform any wiring in a wet location, while standing in water or during a lightning storm.
2. The X-50 should be installed in a well lit location with proper ventilation, having an optimum
temperature range from 40 ° to 95 ° F and a relative humidity range of 20 to 80 percent.
3. The X-50 should not be installed where it will be exposed to direct sunlight or heat.
4. Do not install the X-50 close to or in a strong magnetic field, such as those generated by heavy
motors, televisions, copy machines or some kitchen appliances. Ideally, the X-50 should be
installed in an electrically noise-free environment to avoid interference.
5. Be careful when connecting any type of antenna or power through a cable that will be connected
directly or indirectly to the X-50.
Note:
The manufacturer Warranty does not cover damage caused by abuse, electrical or telephone line
power surges or lightning damage.