Conference, Day & night service mode, Daylight savings – Xblue Networks X-50 User Manual

Page 36: Default setting, Direct inward dial (did), Direct inward system access (disa), Direct telephone line access

Advertising
background image

Feature Description

36

XBLUE Networks

3

Conf

erence

Conference

The systems can conference, join together, multiple Telephone (PSTN or SIP) Lines or extensions, or a

combination of both, to the maximum of three connections so that multiple parties can speak together

simultaneously.

Day & Night Service Mode

The system can run in either day or night mode and can be programmed to automatically switch between day

and night mode.

Daylight Savings

The system supports manual or automatic synchronization of daylight savings. When set to automatic the system

will automatically change from standard to daylight savings time. When set to manual, the administrator will have

to enter the update manually.

Default Setting

Using the “Restore Default” feature found in “Management” the administrator can reset the system back to

factory default. This will also reset some of the SIP Telephone endpoint parameters such as Line Keys, Call

Forward Settings, Auto Answer, Phone Lock and Call waiting. However, it does not reset any system prompts that

have been rerecorded.

Direct Inward Dial (DID)

Using the SIP Trunks, the system can support up to 50 Direct Inward Dial (DID) numbers. These numbers share

with the connected (up to eight) SIP trunk positions. The system has a special DID Ring Table which allows the

administrator to direct the incoming DID numbers to a specific extension, Auto Attendant, UCD group or voice

mailbox. In addition, some DID can also be programming as Direct Outing Dialing (DOD) which can be

programmed to send the DID number as its caller ID.

Direct Inward System Access (DISA)

DISA allows an incoming caller to enter a code into the auto attendant to gain access to system resources. At

default this feature is disabled. Enabling this feature could cause unwanted long distance charges, which are the

sole responsibility of the owner of the system.

Direct Telephone Line Access

Each extension can program any programmable button to be a direct access to a PSTN or SIP Trunk telephone

line.

Advertising