Xblue Networks X-50 - Manual (Page 55)

XBLUE Networks 55
Telephone Feature Description Table
C
al
l Fo
rw
ar
d -
Fo
rk
in
g
4
Call Forward ‐ Forking
Description:
This feature will allow a transferred telephone line or intercom call to ring at two simultaneous destinations, such
as an extension (LAN/WAN) or a cellular telephone. When one party answers the call the other ring telephone will
stop ringing.
Operation:
To activate:
•
*26 + t + Extension Number
•
* + 26 + t + * + (pswd) + * + Outside Number
•
t= 0 for intercom
•
1 for outside line
•
2 for both intercom and outside line
To cancel
•
**26
Notes:
1. This feature will not work when the extension is programmed as the attendant or alternate attendant.
2. This feature will not work for a call that rings to a UCD group.
3. Telephone line calls must be transferred to activate this feature.
4. This feature will only work with one or more SIP Trunks.
Call Forward
Description:
There are fout different types of call forwarding; Always (Direct), Busy, No Answer, and DND each call can be
forwarded to an internal extension, Voicemail, UCD or to an external telephone number such as a cellular
telephone. This allows the user to customize how calls to their extension will forwarded. In addition, intercom and
telephone line calls can be programmed to go to the same or different locations.
Operation:
There are two programming procedures. One for internal and one for external. These can also be programmed
using a standard Internet Web Browser.
This feautre requires SIP Trunks - It will not work with PSTN Lines.