Xblue Networks X-50 - Manual (Page 188)

Voice
188 XBLUE Networks
9
Nu
mb
ering
Pla
n
The operator extension can be set to any number within the numbering plan.
•
The day and a night operator can be the same or different extension numbers. The entered
extension number will be accessed when an extension dials zero (0).
•
A day and a night alternate operator can also be assigned. They can be the same or different
numbers. The Alternate operator will automatically begin ringing if the call goes unanswered
by the operator extension.
•
Reroute Time - is the amount of time that a call will ring at the operator extension before
ringing the alternate extension. When set to unlimited, the call will not forward. The timer
can be set from 15 to 180 seconds. If the alternate attendant does not answer the call, and
this timer is greater than zero (0) the call will go to the operator mailbox.
Press “Save Settings” to save the programming and “Back” to return to the main Numbering Plan Programming
page.
•
Voicemail Service Number - Is the pilot number that will be dialed to ring one of the four voice mail
ports.
•
Start PSTN Line Number - The X-50 has 6 PSTN lines, numbered 701, 701,702, 703, 704 and 705.
•
Start IP Trunk Number - The X-50 has 8 SIP Trunks, number 711, 712, 713, 714, 715, 716, 717 and
718.
•
There are 4 trunk group numbers, 80, 81, 82 and 83, each can have one or more trunks, with a
combination of PSTN and/or SIP Trunks.
•
All Paging Group - Dial this code to page all extensions in the system.
•
Range - LAN, WAN and/or Both (All extensions must be in the same subnet)