Xblue Networks X-50 - Manual (Page 157)

XBLUE Networks 157
Wireless Programming
Wir
el
ess B
ridge
8
•
If disabled, then no action is needed
•
Select between Wireless Access Point and Wireless Bridge
•
Select enabled and enter the SSID and MAC Address or select Enabled (Scan) to have the X-50 locate the
correct wireless device.
Select between “Wireless Access Point” and “Wireless Bridge”, and then select “Enable” and enter the SSID
and MAC Address or Enable (Scan) and have the X-50 locate the Wireless Device.