Xblue Networks X-50 - Manual (Page 98)

Programming Wizard
98 XBLUE Networks
6
WA
N
Po
rt
Se
ttin
gs
For proper operation of Call Log - Dialed, Missed, and Received Calls, the home area
code, and automatic long distance insert, must be programmed into the Call Routing
Table.
Enter the home area code, where the system is located, such as 913 in the “From” and
“To”, then the maximum and minimum digits dialed will be 10, in both, then enter 3
digits to be deleted by the system before the number is dialed. Do not enter any digits
into the “Delete” parameter if all 10 digits should be dialed. Therefore, when a number
in the entered area code is dialed, the area code if there is an entry in the delete
parameter, in the example, 913, will be delete. The remaining 7 digits will be dialed.
The second entry will automatically enter a 1 for all other 10 digit numbers. Enter
“From 2”, “To 9”, Min=10, Max=10, Insert=1, and “Group” default is 1. When any
number that begins with 2 through 9, except 913, will receive a 1, when it is sent to
the telephone line.
Kansas
In Scottsdale Arizona, for example, any 10 digit number that is dialed with 480 as the
first three digits, 480 will be deleted. Any 10 digit number that has 602 and 623 as an
area code, all 10 digits will be dialed. All other 10 digit numbers regardless of area
code will receive a 1 before sending the call to the telephone line.
Scottsdale, AZ