CIRCUTOR CDP-0 - Manual (Page 37)

CDP
Instruction Manual 37
Figure 34: Home screen for the three-phase configuration.
When you press the RIGHT key the menu is displayed with the following options
(
Figure 35 ):
• Measures: Displays the electrical parameters measured by the unit.
• Network: Configuration of the unit's network.
• System: Displays the unit version and the date and time of configuration.
Figure 35: Management of the main menus.
Press the UP or DOWN key to browse the options.
Press the RIGHT key to enter any of the two options.
Press the OK key to exit this menu.