CIRCUTOR CDP-0 - Manual (Page 45)

CDP
Instruction Manual 45
•
Secondary DNS
To configure the Secondary DNS server, carry out the same procedure as with
the Primary DNS.
Figure 58: Third setup screen if DHCP is NO.
5.3. SYSTEM MENU
The SYSTEM option appears on the CDP's main menu and displays the
firmware version of the unit, allowing you to adjust the time.
Figure 59: Date and time setup menu.
The firmware version of the unit is displayed on the first line.
The second line shows the date and time, if you press the RIGHT key the digits
will be displayed intermittently. Using the UP and DOWN, keys you can modify
any date and year value and the changes can be saved by pressing the OK key.
Figure 60: Date and time setup menu.
Note: If the CDP is used as a data logger, check that the date and time are
correct.