Dataman 848 - Manual (Page 11)

DATAMAN 848 MANUAL
Introduction 11
Introduction
The DATAMAN-848 is a PC-based gang programmer that
works through your PC's parallel port. It features eight fully
isolated 48-pin ZIF sockets, extremely high throughput,
standard 5 V and 3 V chip support, production piece
counts, and device insertion and continuity checks, all
within a PC-based design. Device updates are available
through new software releases, giving our customers
quicker and more flexible access to new chip support.
DATAMAN-848 future software updates in EPROM,
EEPROM, and FLASH technology will include 87C5x,
89C5x, and PIC16Cxx microprocessor support. The
DATAMAN-848 was designed with flexibility in mind. If a
customer has special chips that are not in our standard
support list, we can provide special programs that will allow
the DATAMAN-848 to perform as a customized special
production gang programmer.
Features
Universal adapter for Flash chips
The DATAMAN-848 is designed to meet your future needs
in high density Flash chips. Using the resources of your
PC, it supports 32 K bit up to 256-M bit memory chips
without upgrading its hardware. The DATAMAN-848 also
has a universal adaptor that accommodates 48 pin TSOP,
44 pin PSOP, 40 pin TSOP and 32 pin TSOP Flash chips,
which eliminates the need to buy multiple adapters and
saves you money.
Unbeatable speed through semi-concurrent
programming technology
The DATAMAN-848's on-board intelligence reduces
system overhead to a minimum. It can program eight
Flash chips of 8 Mb capacity (such as Intel 28F800B3, for
example) within 45 seconds. An experienced programmer