Dataman 848 - Manual (Page 32)

DATAMAN 848 MANUAL
32 Operation
standard mode, DATAMAN-848 programs the devices in
all 8 ZIF sockets at one time. In concurrent mode, on the
other hand, the sockets are divided into two groups.
Sockets 0-3 comprise group1 and sockets 4-7 comprise
group 2. During operation under concurrent mode, group 1
devices are being programmed while the operator unloads
and inserts chips in the group 2 sockets.
Note: The insertion test must be enabled to use mass-
production mode!
Figure 4.2 Standard mass production mode screen
Figure 4.3 Concurrent mass production mode screen