Dataman 848 - Manual (Page 18)

DATAMAN 848 MANUAL
18 Installation
Minimum PC System Requirements
DOS 3.1 or higher, DOS prompt in WINDOWS 3.1/95/98
CPU: 386 and above
RAM: 4-MB minimum, 16 MB recommended
HD: 8 MB of free hard disk space.
Interface: D-25 connector with standard parallel port or
ECP
Installing the DATAMAN-848
1. Switch the PC and the DATAMAN-848 off.
2. Connect the DATAMAN-848 to a parallel port using the
cable supplied.
3. Switch the PC on.
4. Switch the DATAMAN-848 on.
Installing the DATAMAN-848 Software
Insert the 3 1/2-inch diskette into the PC's A: Drive.
At the DOS prompt, type: A:\> and hit Enter; this activates
the A: Drive
Type Install C:\ ; this will create a directory called
DATA848 on your computer's C drive and will install the
DATAMAN-848 software in this directory.
Following successful installation, run the software by typing
DATA848 at the DOS prompt and pressing Enter
Upgrading the DATAMAN-848 Software