Xtramus NuTAP-S61 V1.2 - Manual (Page 11)

11
3. NuTAP-S61 Management
As mentioned in 2.2. Hardware Installation for NuTAP-S61 Management, you can configure
NuTAP-S61’s settings and view statistics generated while performing network tapping with NuTAP-S61 by:
•
Connecting NuTAP-S61 to PC via an RJ45-to-USB cable, and accessing NuTAP-S61’s
settings/statistics with NuSet-MiniTAP installed on PC.
•
Connecting NuTAP-S61 and PC to the same network via an RJ45 cable, and accessing
NuTAP-S61’s settings/statistics with PC’s web browser.
• Connecting NuTAP-S61 and PC via an RJ45-to-Serial cable, and accessing NuTAP-S61’s
settings/statistics with HyperTerminal.
Please see the sections down below for more information regarding to NuTAP-S61 management.
3.1. Managing NuTAP-S61 with NuSet-MiniTAP
NuTAP-S61 comes with GUI (Graphic User Interface) utility software NuSet-MiniTAP for setting test
criteria and system management. Please note that you have to connect NuTAP-S61 to your PC with an
RJ45-to-USB cable as shown in the figure above.
E-mail: [email protected]
Website: www.Xtramus.com
XTRAMUS TECHNOLOGIES ®