Xtramus NuTAP-S61 V1.2 - Manual (Page 24)

24
Establishing Connection with NuTAP-S61
2. Select the COM port of PC for this connection. Click “OK” to continue.
3. Set the COM port parameters according to the settings listed down
below:
• Bits per second: 38400
• Data bits: 8
• Parity: None
• Stop bits: 1
• Flow control: None
Click “OK” to continue.
Click the “Enter” key on your keyboard to start setting NuTAP-S61 via HyperTerminal. To log in, please
type NuTAP-S61’s user name and password:
•
Default User Name: admin
•
Default Password: admin ( Both the User Name and Password are case-sensitive.)
If you change NuTAP-S61’s user name and password with NuTAP-S61’s configuration webpage,
please log in with the new user name and password here.
E-mail: [email protected]
Website: www.Xtramus.com
XTRAMUS TECHNOLOGIES ®