Xtramus NuTAP-S61 V1.2 - Manual (Page 39)

39 XTRAMUS TECHNOLOGIES ®
/Uninstalling NuSet-MiniTAP
niTAP is a GUI (graphic user interface) utility software for setting test criteria and system
efore using NuSet-MiniTAP’s features and functions, you have to install it on your PC first.
Both NuTAP-S61 and NuTAP-311’s drivers are contained in NuSet-MiniTAP. The required drivers and
NuSet-MiniTAP will be installed at the same time. Please note that DO NOT connect your
NuTAP-S61/NuTAP-311 to the PC before the installation.
w the steps down below to install NuSet-MiniTAP.
1. Installing
NuSet-Mi
management. NuSet-MiniTAP supports NuTAP-S61 and NuTAP-311. When NuTAP-S61/NuTAP-311 is
connected with PC via its RJ45-to-USB cable, you can set test criteria, save/view testing results, and
upgrade firmware/FPGA with NuSet-MiniTAP .
However, b
Please follo
NuSet-MiniTAP Installation
and start the installation process.
1. Double-click NuSet-MiniTAP installation program
2. InstallShield Wizard is starting to install
NuSet-MiniTAP. If you would like to cancel
installation, click “Cancel”.
E-mail: [email protected]
Website: www.Xtramus.com