Xtramus NuTAP-S61 V1.2 - Manual (Page 60)

60
B. Capture Criteria – SDFR
SDFR
SDFR (Self-Discover Filtering Rules) is a technology that makes packet capturing/filtering over Ethernet
easy and convenient. SDFR parameters include filter of Layer 2 Destination MAC Address (DA), Source
MAC Address (SA), Layer 3 Destination IP Address (DIP), and Source IP Address (SIP). Each filter is
independent and can be activated in any combinations.
SDFR – Choosing SDFR Parameters
You can choose the criteria with the check boxes. The SDFR parameters available here
includes:
¾ DA: Destination MAC Address
¾ SA: Source MAC Address ¾ DIP: Destination IP Address
¾ SIP: Source IP Address
As mentioned above, each parameter is independent and can be activated in any
combinations of DA, SA, SIP, DIP, DA & SA, DA & SIP, DA & DIP, SA & SIP, SA & DIP,
SIP & DIP, and DA & SA & SIP &DIP.
SDFR – Rule Setting
The Rule Setting field allows you to set and input the value of DA, SA, DIP, and SIP. The value of SDFR
parameters can be set as Single, Pair, and Range. The following descriptions will use DA as example.
Single: A single value will be used as SDFR
parameter.
Pair: Two values will be used as SDFR
parameters.
Range: Values within the range of the two values
set here will be used as SDFR parameters.
SDFR – Current Filter/Technical Terms
The Current Filter field displays the settings you’ve made, while the Technical Terms field displays the
explanations for DA, SA, DIP, and SIP.
SDFR – Button
Apply: Apply and save the changes you’ve made on this page. After making any
settings on this page, you must click the Apply button or all changes will be lost.
E-mail: [email protected]
Website: www.Xtramus.com
XTRAMUS TECHNOLOGIES ®