Hardware installation for network tapping – Xtramus NuTAP-S61 V1.2 User Manual

Page 9

Advertising
background image


9

2. NuTAP-S61 Application Example & Hardware Installation

2.1. Hardware Installation for Network Tapping

As the example shown in the figure above, NuTAP-S61 allows you to perform network tapping. You can

monitor/filter packets that meet the criteria by:

Connecting NuTAP-S61’s Console Port to a PC with NuSet-MiniTAP installed via a RJ45-to-USB

cable.

Connecting NuTAP-S61’s Monitor Port (M0 or M1, depending on your settings) to a PC with other

network TAP software installed via an RJ45 cable.

E-mail: [email protected]

Website: www.Xtramus.com

XTRAMUS TECHNOLOGIES

®

Advertising
This manual is related to the following products: