Xtramus NuTAP-S61 V1.2 - Manual (Page 46)

46
3.1.2. Config.
Function Descriptions – Config.
Network Port
A0/A1
The Netw allows you to make
settings reg lay Screen. For more
det gs on page 21.
ork Port A0/A1 function located on the Menu Bar
arding to Network Port A0/A1 on the Main Disp
ail information, please refer to 3.5. Network Port Settin
Monitor Port
M0/M1
The allows you to make settings
regarding to Screen. For more detail
on page 33.
Monitor Port A0/A1 function located on the Menu Bar
Monitor Port A0/A1 on the Main Display
information, please refer to 3.6. Monitor Port Settings
Y
11’s Network Port A0/A1
and function located on the Menu
Bar.
ou can make settings regarding to NuTAP-S61/NuTAP-3
Monitor Port M0/M1 with the Port Configuration
You can set the
Ports and Monitor Port connection rate for Network
s with the Media Type
.
¾ Set all Network Ports and
s as auto-negotiation.
¾ Set all Network Ports
¾ Force 100M Full: Set all Network Ports
and Monitor Ports to 100M Full-duplex.
menu tab
Auto All:
Monitor Port
Force 10M Full:
and Monitor Ports to 10M Full-duplex.
When Flow Control is enabled, the
transmitting rate will drop if traffic overflow
occurs.
¾ On: Enable Flow Control.
¾ Off: Disable Flow Control.
Please note that before making Rate
Port Control settings, Network
Control function must be enabled. A0/A1’s Flow
Port
Configuration
/receiving rate
w Control is
le/Disable Rate Control.
¾ Rate: When Rate Control is enabled,
you can set the transmitting/receiving rate
for Network Port A0/A1.
You can set the transmitting
for Network Port A0/A1 if Flo
enabled.
¾ On/Off: Enab
E-mail: [email protected]
Website: www.Xtramus.com
XTRAMUS TECHNOLOGIES ®