Xtramus NuTAP-S61 V1.2 - Manual (Page 43)

43
2. NuSet-MiniTAP Overview
at your NuTAP-S61 or NuTAP-311 is properly connected
for connecting NuTAP-S61 to PC via an RJ45-to-USB
2.1. Starting NuSet-MiniTAP
Before starting NuSet-MiniTAP, please be sure th
to your PC. The figure down below is an example
cable.
You can start NuSet-MiniTAP by:
Starting NuSet-MiniTAP
¾ Double-click NuSet-MiniTAP icon
located on your PC’s desktop
¾ Click Start Æ Programs Æ
Xtramus
Æ NuSet-MiniTAP Æ
NuSet-MiniTAP.
If your PC is not connected with NuTAP-S61
/NuTAP-311, you can still run NuSet-MiniTAP
under Demo Mode. Almost all NuSet-MiniTAP’s
functions are available under Demo Mode.
However, please note that Demo Mode is for
system demo purposes only, and does not
serve any testing purposes at all.
E-mail: [email protected]
Website: www.Xtramus.com
XTRAMUS TECHNOLOGIES ®