Beisler 1911-4 - Manual (Page 21)

- B 21 -
Short Seam Automat 1911-4 / 1912-4 Working Instructions Beisler Automated Sewing Equipment
Fig. 9: Display during seam number selection:
1 Active seam number
2 Passive seam number
3 Seam number is selected
Fig. 8/9
Fig. 8
Fig.9
B.3
Operation
B.3.3 Selecting the sewing program
After the machine has been turned on and the control pro-
gram has been activated, the sewing program that had been
selected last is set.
Sewing programs 1 are stored in the memory (M). The
program control memory can store up to 50 sewing pro-
grams (M 01-M 50).
Fig. 8: For each sewing program, up to six seam
numbers 2 (01, 02, 03, 04, 05,06) can be assigned.
The program control of the machine is equipped at the
factory with a standard program:
•
Sewing program M 01 with four different seams for au-
tomated stitching of slash selvages. The numbers
(01 - 04) designate seams of different stitch widths.
A sewing program may be combined with one seam, with
several seams or with all four seams.
If a sewing program with several seam numbers is requested,
the seams are made in the sequence of the seam numbers
from left to right.
The sequence of the seam numbers is arbitrary.
Please make sure that the handwheel of the main clamp
is set correctly for the seam number of the seam that is
made first (left position in the line of seam numbers).
1. Select sewing program at operating panel.
Request memory:
• Press
 key.
Select sewing program number, e.g. 01:
• Press
 and
keys.
The selected program is activated immediately.
2. Select seam number of desired seam.
Move cursor to seam number:
• Press
0 or / key.
Confirm selection:
• Press
% key.
3. Rotate main clamp handwheel to the selected seam
number.
M 01 01 03 04 02
1 2 3 4 32MM
STUECK: 0000
29
533
1 2