Beisler 1911-4 - Manual (Page 81)

- D 81 -
Short Seam Automat 1911-4 / 1912-4 Working Instructions Beisler Automated Sewing Equipment
D.3
Programming
Fig. 4/5 D.3.6 Level 2 special parameters / Functions
Functions of level 2 submenus:
The following section describes the special parameters that
can be enabled or disabled as functions.
&+2?3A

F1 Back to start level
F2 Enable / disable functions
Enabling / disabling functions:
Functions can be enabled or disabled for a selected se-
wing program. This process covers three levels (3, 4 and
5). The changes made are reflected on the display:
Fig. 4: Enabled functions are displayed as symbols
1
and
2.
Fig. 5: Disabled functions are removed from the sewing
pictograph
1 and from the inner section 2 of the dis-
play.
Start menu:
+
• Press
 key.
Level 3 is displayed.
Level 3 submenus:
&>= :,

F1 Back to start level
F2 Switch photocell for beginning of seam on or off
F3 Switch photocell for end of seam on or off
F7 Swivel stamp on / off
F8 Request next level (level 4)
Fig. 4
Fig. 5