Beisler 1911-4 - Manual (Page 86)

Short Seam Automat 1911-4 / 1912-4 Working Instructions
- D 86 -
Beisler Automated Sewing Equipment
D.4
Factory settings
D.4.1 Factory settings for global parameters
M 01 global parameters 1911-4 / 1912-4:
Pos. Global parameters 1911-4 / 1912-4 Value Unit
01 CLAMP FWD. TO PART 0.8 sec
02 TILL CLAMP DOWN 0.3 sec
03 TILL VACUUM OFF 0.3 sec
04 THREAD LENGTH, BOBBIN FULL 004 m
05 TILL CLAMP INSERTING 0.2 sec
06 SEWING END ->CL.SIDEW 0.1 sec
07 TIME AFTER CLAMP OPEN 0.5 sec
17 TILL TENSION OPEN 0.00 sec
18 DURATION OF TENS. OPEN 0.2 sec
19 TILL THREAD CLAMP FORW. 0.5 sec
20 DUR.THREAD CLAMP FORW. 0.6 sec
29 TILL SWING RETAINER DWN. 0.0 sec
30 TILL RETAINER SWINGS 0.0 sec
31 DUR.OF PULLING RETAINER 0.0 sec
32 BLOW OUT THE PART 0.5 sec
33 CLAMP MOVES TO STACKER 0.0 sec
35 THREAD CATCH. "UP" POS 023 INC
36 SWITCH ON POS.OF TRIMM. 100 INC
37 TRIMMING SPEED 180 Upm
38 DURATION OF TRIMMING 0.35 sec
39 THREAD CATCH.TURNS BACK 25 INC
40 PROCESS IN STEPS 00