Beisler 1911-4 - Manual (Page 74)

Short Seam Automat 1911-4 / 1912-4 Working Instructions
- D 74 -
Beisler Automated Sewing Equipment
D.3
Programming
D.3.3 Service menu level 1
Functions on level 1
The function keys on the level 1 are assigned to the sym-
bols above them as shown on the display.
The settings of the global parameter menu (GP) and of
the special parameter menu (SP) which can also be re-
quested from this level are described in separate sections.
&'(6 )@7

F1 Back to start level
F2 Request global parameter menu
F3 Request special parameter menu
F4 Set seam sequence
F6 Reset day counter to zero
F7 Manual winding
F8 Select machine control inputs / outputs
Setting the seam sequence:
The setting refers to the selected sewing program. The
sequence for sewing the seams can be freely selected.
When the sequence is set, existing seam numbers are
overwritten or new seam numbers are written
• Press  key.
6
• Press
 key.
The display shows the marking of the sewing program and
the seam numbers.
01 01 0 01 02 03 04
Mark seam number to be changed using cursor:
01 01 02 03 04
Open "Overwrite" function:
• Press
% key.
Enter new seam number using numeric keypad:
01 01 04 03 04
Confirm input and exit menu:
• Press  key.
The display shows the new seam sequence.
01 01 03 04
Erase seam number:
• Mark seam number using cursor, then erase:
• Press  (erase) key.
Confirm input, exit menu:
• Press  key.
NOTE - Seam sequences
Just as the sequence of the seams may be selected as
desired, a seam can be written into a sewing programs
once or several times. A sewing program can consist of
up to 6 seams.
Resetting the day counter to zero:
This function is used to reset the day counter for a pro-
duction cycle to zero.
• Press
key.
)
• Press  key.
The display counter is now reset to zero.
Display: PART: 0000