Beisler 1911-4 - Manual (Page 43)

- C 43 -
Short Seam Automat 1911-4 / 1912-4 Working Instructions Beisler Automated Sewing Equipment
C.5
Maintenance
C.5.4 Repairs
Clamp rail replacement:
The clamp rail must be replaced if the protective lining at
the bottom side of the rail is worn.
Clamp rail removal:
1. Lift main clamp.
2. Fig. 10: Loosen retaining screw
1 .
3. Pull clamp rail
2 down and remove.
Clamp rail installation:
1. Insert clamp rail
2 into fixture and push up until it re-
aches the stop. Make sure the clamp rail is positioned
evenly in the fixture.
2. Tighten retaining screw
1.
Fig. 10
Fig. 10
1
2