Beisler 1911-4 - Manual (Page 87)

- D 87 -
Short Seam Automat 1911-4 / 1912-4 Working Instructions Beisler Automated Sewing Equipment
D.4
Factory settings
D.4.2 Factory settings for global parameters
M 01 special parameters 1911-4:
Fig. 6
Pos. SEAM 01 - STITCH WIDTHS 30 MM Value Unit
01 CLAMP POSITION RIGHT 250 mm
02 TILL GUIDE TO WORK POS. 700 mm
03 INSERT SPEED 50 %
04 CLAMP SPEED 85 %
05 DISTANCE TILL SEWING 02 mm
06 SEWING SPEED 1 1500 Rpm
07 SEWING SPEED 2 4200 Rpm
08 SEWING SPEED 3 1500 Rpm
09 DISTANCE SEWING SPEED 1 20 mm
10 DISTANCE SEWING SPEED 3 20 mm
12 THREAD MONITOR ON AFTER 05 mm
13 TOP THREAD MON. FILTER 20 mm
14 BOTTOM THREAD MON. FILTER 00 mm
16 TACKING LENGTH SEAM BEG 00 mm
17 TACKING LENGTH SEAM END 05 mm
18 STITCH LENGTH SEAM BEG 2.0 mm
19 DISTANCE OF THIS ST.LEN 08 mm
20 1.ST.LENGTH OF CURVE 3.3 mm
21 DIST.OF 1.STICH LENGTH 22 mm
22 2.ST.LENGTH OF CURVE 3.2 mm
23 DIST.OF 2.STITCH LENGTH 40 mm
24 ST.LENGTH OF MAIN SEAM 3.0 mm
25 STITCH LENGTH SEAM END 2.0 mm
26 DIST.OF THIS ST.LENGTH 10 mm
27 ST.LENGTH TRIMM.STITCH 1.5 mm
28 CHOICE OF TRIMMING ST 00
30 START MODUS 01
32 BLOWING MODUS 01
33 PUSH RETAINER MODUS 01
34 SWING RETAINER MODUS 00