ChamSys MagicQ User Manual - Manual (Page 310)

MagicQ User Manual 281 / 355
Table 42.4: Setup, Cue Stack Defaults, Fader
Setting Normal(live) Theatre non track Theatre Track Hog II warp
Fader activates Yes No No No
Fader releases Yes No No No
Table 42.5: Setup, Cue Stack Defaults, Flash
Setting Normal(live) Theatre non track Theatre Track Hog II warp
Flash activates Yes No No No
Flash releases Yes No No No
Table 42.6: Setup, Cue Stack Defaults, Step
Setting Normal(live) Theatre non track Theatre Track Hog II warp
Multi Cue,
Controlled as chase Yes No No No
Multi Cue, Step halts
before executing No Yes Yes Yes
Multi Cue, Zero Old
HTP Yes Yes No No
Multi Cue, Zero Old
FX Yes Yes No No
Track L L HLF HLF
Table 42.7: Setup, Cue Stack Defaults, Step Times
Setting Normal(live) Theatre non track Theatre Track Hog II warp
HTP in, HTP out, Pos
times 0s 3s 3s 3s
For changing between tracking and non-tracking mode simply change the “Programmer Tracking” setting in the Setup Window,
“Prog” tab. This automatically sets the Default Cue Stack options (Recalculate state on jumps, Zero old HTP, Zero old FX)
correctly.
42.2 Playback Mode
The playback mode determines how the console plays back cues. The options are Normal and Safe. In Normal mode the user can
make changes during playback just like when they were programming the show. In Safe mode, making changes is not allowed
and backups are turned off to any possible interference with the running of the show.