ChamSys MagicQ User Manual - Manual (Page 367)

MagicQ User Manual 338 / 355
Table 46.16: (continued)
Hard power off Hold rear reset button 15 seconds
Reset graphics SHIFT + DBO
Shut down console CTRL + DBO
Lock/unlock console <CTRL + SOFT button Encoder A>
Console lights on/off <CTRL + SOFT button Encoder B>
Console screen save, stealth mode SHIFT + BLIND
Enter/exit test mode MQ100 SHIFT + SHIFT
Enter/exit test mode MQ40/60/70 ATL + CTRL + SHIFT
Enter/exit test mode PC/Mac Type test and press CTRL + SHIFT
Table 46.17: Cue Stack Macros
Activate Playback A <Playback no>
Run Keyboard Macro B <Macro no>
Release Playback R <Playback no>
Activate Playback 100% T <Playback no>
Release Playback 0% U <Playback no>
Go Playback G <Playback no>
Stop Playback S <Playback no>
Choose Playback C <Playback no>
Set level last Cue Stack activated K <Level>
Set level current Playback L <Level>
Set level of this Playback M <Level>
Jump to Cue id current Playback J <Cue Id>
Activates Cue Stack (Stack Store) E <Qid from Stack Store>
Releases Cue Stack (Stack Store) F <Qid from Stack Store>
Change Page P <Page no> (0 is next)
Open view (window layout) V <View no>
Set decoded time code O <Time code>
Enable/disable time code gen W <Enable> (1 enable, 0 dis)
Set current time code (gen only) Q <Time code>
Activate Playback 18 on wing 1 A1-18
Go on Playbacks 3 to 5 G3THRU5
Set the level of Playback 6 to 60% C6L60