ChamSys MagicQ User Manual - Manual (Page 362)

MagicQ User Manual 333 / 355
Chapter 46
MagicQ Short Cuts
Table 46.1: Saving / Loading
New show SETUP <View Settings> <New Show>
Save show SETUP <View Settings> <Save Show>
Load show SETUP <View Settings> <Load Show>
Save settings SETUP <View Settings> <Save Setting>
Load settings SETUP <View Settings> <Import Settings>
Save partial show SETUP <View Settings> <SHIFT + Export Show>
Merge in show SETUP <View Settings> <SHIFT + Import Show>
Load archived backup SETUP <View Settings> <SHIFT + Load Backup>
Export patch list PATCH <View Chans> <Export Patch>
Import patch list PATCH <View Chans> <Import Head>
Import ASCII file PATCH <View Chans> <Import USITT>
Reset console SETUP, <SHIFT + QUIT>
Table 46.2: Patching
Select head for patching PATCH <Choose Head>
Patch 1 head, next free address 1 <Patch It>
Patch 5 heads, next free address 5 <Patch It>
Patch 1 head at uni 1 address 1 1@1-1 <Patch It>
Patch 5 heads at uni 2 address 1 5@2-1 <Patch It>
Patch 5 heads at uni 2 address 1, head 100 5@2-1 *100 <Patch It>
Patch 5 heads with offset 20 5/20 <Patch It>
Patch after uni 3 address 50 5@+3-50 <Patch It>
Reselect head Cursor to head <SHIFT + Choose Head>
Edit patched head Cursor to head <SHIFT + Edit Head>
Repatch selected heads without changing offset 3-1 / ENTER
Table 46.3: Select Heads
Select head 1 1 @@
Select heads 1 to 4 1 THRU 4 @@
Select heads 1 to 10, not 5 1 THRU 10 – 5 @@
Deselect all heads 0 @@