ChamSys MagicQ User Manual - Manual (Page 60)

MagicQ User Manual 31 / 355
5.3.5 Copying items
• Press the COPY button.
• Press the touch screen / click / ENTER over the source item.
• Press the touch screen / click / ENTER over the destination item.
You can also press COPY instead of pressing ENTER in the above sequence.
To copy multiple items highlight it is often easier to highlight the items before pressing COPY. If you press COPY immediately
after highlighting multiple items then the console will assume that these are the source items and will only prompt for the
destination. You can hold SHIFT or CTRL to highlight multiple items.
When copying Cues, Cue Stacks or Pages the console by default does not make individual copies of the Cues - the Cue Stacks
link to the same Cues. To copy unlinked (i.e. to create new Cues) then press SHIFT and COPY in the above sequence and select
Unlinked.
5.3.6 Removing items
• Press the REMOVE button.
• Press the touch screen / click / ENTER over the item to remove.
To remove multiple items highlight it is often easier to highlight the items before pressing REMOVE. If you press REMOVE
immediately after highlighting multiple items then the console will assume that you wish to remove the highlighted items.
You can also press REMOVE instead of pressing ENTER in the above sequence.
5.3.7 Recording items
In boxes style windows it is possible to record an item (e.g. in the Group Window, to record a group):
• Press the RECORD button.
• Press the touch screen / click / ENTER over the item to record.
You can also press RECORD instead of pressing ENTER in the above sequence.
5.4 Icons
MagicQ supports icons for all programmed items. The size of the icons can be set in the Window Settings in the Setup Window.
Icons can be used on Groups, Colours, Beams, Positions, Cues, Cue Stacks and in the Execute Window.
To set an icon for a Window item (e.g. a Palette Entry) press SHIFT SET. Press the touch screen / click / ENTER over the item
to set an icon for. This will open the Icon library. The Icon library is split into different types of Icons for colours, positions and
different types of gobos.
Select the icon from the icon library.