Compuprint 10200 Programmer Manual - Manual (Page 108)

Commands
104
DC4 DC4 ESC N
Selects/loads or parks the fanfold from the Front 2 path. (Compuprint)
ASCII Code DC4 DC4 ESC N n
Hexadecimal Value 14 14 1B 4E n
Decimal Value 20 20 27 78 n
Range 0 < n < 1
n Selection
0 Selects and loads the fanfold from the Front 2 path. If the paper is present in the
Front 1 path, the printer automatically parks this fanfold that is not requested before
loading the new one (after having pressed the
PARK key in response to the TEAR IF
NECESS/PARK PAPER message).
1 Parks the fanfold loaded from the Front 2 path to allow the tear off function (after having
pressed the
PARK key in response to the TEAR IF NECESS/PARK PAPER message).
DC4 DC4 ESC p
Sets quality printing. (Compuprint)
ASCII Code DC4 DC4 ESC p n
Hexadecimal Value 14 14 1B 70 n
Decimal Value 20 20 27 112 n
n Selection n Selection
0 HS Draft 3 NLQ
1 Best Draft 4 LQ
2 Normal Draft 5 DLL
If attributes are sent in the print line during the HS Draft printing, these attributes will be forced to
be printed in Draft mode.