Compuprint 10200 Programmer Manual - Manual (Page 20)

Commands
16
ESC A
Sets variable vertical spacing to n/60 inch. (IBM XL24 AGM, EPSON)
ASCII Code ESC A n
Hexadecimal Value 1B 41 n
Decimal Value 27 65 n
This command changes the default vertical spacing to n/60 inch. The new vertical spacing value
is immediately activated.
ESC A
Sets variable vertical spacing to n/72 inch. (IBM XL24, 2391 +)
ASCII Code ESC A n
Hexadecimal Value 1B 41 n
Decimal Value 27 65 n
This command changes the default vertical spacing to n/72 inch. The vertical spacing value is
stored and activated only after the ESC 2 code is received.
ESC B
Sets vertical tab stops.
ASCII Code ESC B n
1
… n
x
0
Hexadecimal Value 1B 42 n
1
... n
x
00
Decimal Value 27 66 n
1
... n
x
0
Range 1 < n < 255
In EPSON mode, sets vertical tab stops in the 0 Vertical Format Unit (VFU) channel. This code
sets up to 16 vertical tab stops at the line specified by n
1
, n
2
and so on in the 0 VFU channel. The
tab stops are memorized as physical positions. In IBM modes, this code sets up to 64 vertical tab
stops at the line number specified by n
1
, n
2
and so on in the 0 VFU channel. The tab stops are
memorized as logical positions.