Compuprint 10200 Programmer Manual - Manual (Page 230)

Interfaces
226
ESC $ Sets the absolute printing
position. (EPSON) 10
ESC % Selects user-defined character
set. (EPSON) 58
ESC & Defines the 24-pin download
characters. (EPSON) 59
ESC ( - Sets score line. (EPSON) 30
ESC * Sets dot graphics printing.
(IBM XL24 AGM, EPSON) 65
ESC / Selects the Vertical Format
Unit (VFU) channel. (EPSON) 11
ESC : Sets 12 CPI. (IBM) 31
ESC : Copies characters from ROM
to RAM. (EPSON) 61
ESC ? Reassigns dot graphics mode.
(EPSON) 66
ESC @ Initializes the printer. (EPSON) 76
ESC [ - Selects the score line. (IBM
2391 + only) 31
ESC [ I Sets font and pitch of a
character. (IBM 2391 + only) 36
ESC [ @ Selects the printing type style.
(IBM 2391 + only) 32
ESC [ @ Sets double high printing and
double line feed. (IBM) 34
ESC [ \ Sets vertical units. (IBM) 10
ESC [ d Set the print quality. (IBM
2391+ only) 35
ESC [ g Selects 8 or 24 needle dot
graphics mode. (IBM) 71
ESC [ K Sets initial conditions. (IBM
2391 + only) 76
ESC [ T Selects a Code page. 52
ESC \ Sets the relative dot position.
(EPSON) 11
ESC \ Prints characters from all
characters table. (IBM) 53
ESC ] Sets a reverse line feed. (IBM) 7
ESC ^ Prints a single character from 53