Compuprint 10200 Programmer Manual - Manual (Page 131)

Commands
127
ESC J or VTS
Vertical tab setting.
ASCII Code ESC J or VTS
Hexadecimal Value
1B 4A (7-bit) or 8A (8-bit)
Decimal Value
27 74 (7-bit) or 138 (8-bit)
This command causes a vertical tab stop to be set to the decipoint value of the current vertical
position.
ESC [ p
1
; p
n
v
Sets vertical tab stops at specified positions (Multiple Vertical Tab Set - VTS).
ASCII Code ESC [ p
1
; p
n
v
Hexadecimal Value
1B 5B p
1
3B p
n
76
Decimal Value
27 91 p
1
59 p
n
118
This command sets up to 12 vertical tab stops at each decipoint position specified by p
parameters. The tab stops are measured from the top of the page. When specifying more than
one position, enter the parameters in ascending order.
FF
Form feed.
ASCII Code FF
Hexadecimal Value
0C
Decimal Value
12
This code causes the data in the print buffer to be printed out and then advances the paper to
the top of the next form.