Compuprint 10200 Programmer Manual - Manual (Page 80)

Commands
76
ESC Q
Deselects Printer. (IBM)
ASCII Code ESC Q n
Hexadecimal Value 1B 51 n
Decimal Value 27 81 n
This sequence tells the printer not to accept data from the host. The host must reset the printer
or select the printer by using DC1 (Select Printer) to accept data. To deselect the printer, use
ESC Q35.
M M i i s s c c e e l l l l a a n n e e o o u u s s
BEL
Buzzer.
ASCII Code BEL
Hexadecimal Value 07
Decimal Value 7
This code sounds the printer’s buzzer.
BS
Print and space back one position.
ASCII Code BS
Hexadecimal Value 08
Decimal Value 8
This code causes the printing to be continued from one column to the left of the current carriage
position. The printer ignores this command if it would move the print position to the left of the
left margin.