Compuprint 10200 Programmer Manual - Manual (Page 25)

Commands
21
Character Width Horizontal Spacing Range of columns
5 0 < n < 67
6 cpi 0 < n < 80
7.5 cpi 0 < n < 100
8.5 cpi 0 < n < 114
Double Width
10 cpi 0 < n < 134
10 cpi 0 < n < 134
12 cpi 0 < n < 160
15 cpi 0 < n < 201
17 cpi 0 < n < 229
20 cpi 0 < n < 255
Normal
24 cpi 0 < n < 255
Any value outside the accepted range is ignored and the previous setting remains in effect. The
left margin must be smaller than the right margin. The physical position set for the left margin
does not change if the horizontal spacing is modified. This command overrides the menu setting.
ESC N
Sets the skipover perforation to n lines.
ASCII Code ESC N n
Hexadecimal Value 1B 4E n
Decimal Value 27 78 n
Range 1 < n < 127 (EPSON mode)
1 < n < 225 (IBM mode)