Esc [ p1; p2; p3 sp, Esc [ p, Defines the general operation. parameter p – Compuprint 10200 Programmer Manual User Manual
Page 139: Parameter p, Is not required. if p, 0, the contents of the user format specified by p, Overwrites the current one. if p, If p
Commands
135
ESC [ p
1
; p
2
; p
3
SP |
Customer setup save/unsave (CSX).
ASCII Code
ESC [ p
1
; p
2
; p
3
SP |
Hexadecimal Value
1B 5B p
1
3B p
2
3B p
3
20 7C
Decimal Value
27 91 p
1
59 p
2
59 p
3
32 124
This sequence allows saving & restoring page and print definitions into or out of the current
User Format. Parameter p
1
defines the general operation.
Parameter p
2
specifies the User Format to read from or to write as indicated by p
1
.
Parameter p
3
is not required. If p
1
= 0, the contents of the User Format specified by p
2
overwrites
the current one.
If p
1
= 1, the current User Format is saved into the User Format specified by p
2
.
If p
2
is not specified, the default is the last selected Format.
p
2
FUNCTION
1
Format 1 (NVRAM)
2
Format 2 (NVRAM)
3
Format 3 (NVRAM)
4
Format 4 (NVRAM)
6
ROM (resident memory defaults)