Comtech EF Data SDM-650B - Manual (Page 187)

SDM-650B Satellite Modem Remote Control Operation
Rev. 6 B–11
B.1.3.11 Differential Encoder Enable
Command: <add/DENC_xxx”cr”
Response: >add/DENC_xxx”cr”lf”]
Status Only: <add/DENC_”cr”
Response:
>add/DENC_xxx”cr”lf”]
Where: xxx = ON or OFF.
B.1.3.12 Transmit Clock
Command: <add/TC_xxx”cr”
Response: >add/TC_xxx”cr””lf”]
Status Only: <add/TC_”cr”
Response:
>add/TC_xxx”cr””lf”]
Where: xxx = INT or EXT.
B.1.3.13 Receive Clock
Command: <add/RC_xxx”cr”
Response: >add/RC_xxx”cr””lf”]
Status Only: <add/RC_”cr”
Response:
>add/RC_xxx”cr””lf”]
Where: xxx = NRM or INV.
B.1.3.14 Baseband Loopback
Command: <add/BBL_xxx”cr”
Response: >add/BBL_xxx”cr””lf”]
Status Only: <add/BBL_”cr”
Response:
>add/BBL_xxx”cr””lf”]
Where: xxx = ON or OFF.