Comtech EF Data SDM-650B - Manual (Page 228)

Remote Control Operation SDM-650B Satellite Modem
B–52 Rev. 6
B.2.7.1.3 Maximum AUPC Power Limit
Command: <add/MAXP_-nn.n”cr”
Response: >add/MAXP_-nn.n”cr””lf”]
Status Only: <add/MAXP_”cr”
Response:
>add/MAXP_-nn.n”cr””lf”]
Where: nn.n = 5.0 to 30.0, in 0.5 increments (power in dBm).
B.2.7.1.4 Minimum AUPC Power Limit
Command: <add/MINP_-nn.n”cr”
Response: >add/MINP_-nn.n”cr””lf”]
Status Only: <add/MINP_”cr”
Response:
>add/MINP_-nn.n”cr””lf”]
Where: nn.n = 5.0 to 30.0, in 0.5 increments (power in dBm).
B.2.7.1.5 E
b
/N
0
Target AUPC Set Point
Command: <add/ENSP_n.n”cr”
Response: >add/ENSP_n.n”cr””lf”]
Status Only: <add/ENSP_”cr”
Response:
>add/ENSP_n.n”cr””lf”]
Where: n.n = 3.2 to 9.7, in 0.1 increments (E
b
/N
0
in dB).
B.2.7.1.6 Maximum AUPC Tracking Rate
Command: <add/MAXT_n.n”cr”
Response: >add/MAXT_n.n”cr””lf”]
Status Only: <add/MAXT_”cr”
Response:
>add/MAXT_n.n”cr””lf”]
Where: n.n = 0.5 to 6.0, in 0.5 increments (max. tracking rate in dBm/minute).