B.2.6.2 date, B.2.6.3 remote, B.2.6.4 clear stored faults – Comtech EF Data SDM-650B User Manual
Page 226
Remote Control Operation
SDM-650B Satellite Modem
B–50
Rev. 6
B.2.6.2 Date
Command:
<add/DATE_mm/dd/yy”cr”
Response:
>add/DATE_mm/dd/yy”cr””lf”]
Status Only: <add/DATE_”cr”
Response:
>add/DATE_mm/dd/yy”cr””lf”]
Where:
mm = month.
dd = day.
yy = year.
Example: Set modem 235 date to 11/30/87.
Command:
<235/DATE_11/30/87”cr”
Response:
>235/DATE_11/30/87”cr””lf”]
B.2.6.3 Remote
This command configures the modem for remote operation.
The modem will respond to any status request at any time. However, the modem must be
in “Remote Mode” to change configuration parameters.
Command:
<add/REM_”cr”
Response:
>add/REM_”cr””lf”]
B.2.6.4 Clear Stored Faults
This command is used to clear all stored faults logged by the modem.
Command:
<add/CLSF_”cr”
Response:
>add/CLSF_”cr””lf”]